Kawasaki Ninja ZX-6R Forum banner

>>> Litrerally ALL of my bikes parts

For Sale 
6K views 42 replies 23 participants last post by  A1_Digest 
#1 · (Edited)
>>> Literally ALL of my parts

So, after my knee injury and selling my bike and a LOT of thoughts -- I've decided that I'm not getting another ZX6R and all of my parts, spares, track stuff is all up for grabs. I will have it posted here for a week and then it's going on facebook, wera, etc etc. All parts were on my 09 but some can be used on other gens.

Compatibility between models will be listed in blue, links will be listed in green. Buy this stuff, I’m tired of holding onto it.


Pictures will be attached in several posts. Please read everything.
 

Attachments

See less See more
5
#3 · (Edited)
Aftermarket Parts :

-- CustomLED Tail Light --
Works great, no issues. The light is very very bright and flashes rapidly 5-6 times when hitting the brakes. You can buy a controller to program the pulse behavior. One of the safest additions to my bike. Comes with box and has the rubber piece glued in, and uses OEM style connectors that are plug and play.
CustomLED
09-12 Only
$100


-- HotBodies “Superbike” Undertail --
I bought this from Cody on here and then never used it. Includes an OEM tail light but needs the rubber piece (you can reuse your stock one). One of the wires disconnected from its base, but a quick solder will fix that.
Undertail
09-12 Only
$50


-- PC5 and AutoTune --
Worked outstanding for me. Comes with everything like new. I’d like to sell these together but I’ll separate if there’s two buyers. If you’re going to use the AutoTune you WILL need to have an O2 bung in your exhaust – most aftermarket full systems already have this.
PC5
AutoTune
PC5: 09-12 only as far as I know (it may work with 13-17)
AT: 09-12 / 13-17 / maybe more
$550


-- K&N Air Filter --
Nothing to say here. Worked great. Easy drop-in install. No issues, very clean.
K&N Filter
09-12 / 13-17
$40


-- Vortex Rearsets --
Hands down my favorite mod. Used for about a year and they’re in excellent condition sans one scrape on the toe peg from a lowside. All original parts from the rearsets are included as well as a rear brake switch for the master cylinder that I’ve wired with stock connectors so it’s plug and play. I am like 99% sure that some of the stock hardware is re-used on the rear master, shift lever and shift rod. However, I’ve included extra heim joints if you need them. Also has an extra toe peg and bracket and bolt for a foot peg.
Rearsets
09-12 / 13-17 if you switch from male to female shift rod (and heim joints), probably others.
$250


-- Spiegler Stainless Steel Braided Brake Lines --
These are black, with both front (2 separate lines) and rear. Easily one of the best bang for the buck mods. Consistency = confidence. These most certainly will not work with ABS on 13-17.
Important note -- the rear line is shorter than standard as it was paired with the vortex rearsets, which sit much further back than stock rearsets. I cannot be sure whether or not it will reach from the rear caliper to the rear master on a stock rearset.
Stainless Lines
09-12 / 13-17
$100


-- Speedo Healer --
SpeedoDRD brand. Never used it (cause I’m dumb).
SpeedoDRD
09-12 / maybe others [not needed on 13-17]
$50


-- ASV C5 Levers --
Shorty levers for clutch and brake. Black levers with blue adjustment dial. These were one of my favorite mods. Includes everything, pretty much like new.
Brake and Clutch Levers
09-12 / 13-17
$175

-- Cox Radiator Guard --
Not much to say here, worked great for me. No dents, creases, etc. Throw it on and ride.
Radiator Guard
09-12 / 13-17 / probably more
$75


-- Armour Bodies “supersport” track fairings with Fuel Tank / Tank Panels --
Complete track setup. These track fairings have been down once in that low speed lowside. They are still overall functional 100%, but one of the mounting points is busted. You’re welcome to sand them down and repair them, or ride everything as is like I did. I’m just not going to mess with fiberglass, I am certain that I’d just screw it up and these are good fairings. The gas tank is almost perfect. It had one dent in the side when I bought it but can’t be seen with the R&G CF sliders on each side (held with tape, not cement). The tank panels / tank have techspec snakeskin grips. The fuel pump IS included, but not pictured — tank was disassembled and cleaned. Another item I won’t split up unless there’s a buyer for each.
AB Fairings
Fairings: 09-12 / 13-17 if you replace the intake on the nose.
Tank: 09-12 / 13-17 if you add the additional panel bracket.
$750



Stock Parts :

-- Surf Blue Fairings (2009 color) --
Both of these peices are structurally sound with no cracks or broken mounting points and 95% flawless paint wise. Both of these pieces I "burned" with a buffer, and so both were replaced. These are going on ebay or in the trash soon. The cowl with the rubber piece and the brackets is perfect. The other cowl is JUST the plastic without the bracket, and is very rashed (it flew off because I didn’t secure it).
09-12 Only
Mid fairing $60
Tail fairing $15
Good cowl $100
Bad cowl $40


-- Folding Mirrors from 13+ --
These should fit back to 05 through 08, but I'd ask that you double check first. They definitely work on the 09 to present. I bought these used and wasn't told that one mirror had some scratching on the outside, but mirror surface itself is perfect.
09-12 / 13-17 / and I think more
$50


-- Front and Rear Wheels / Tires --
The wheels are pretty much perfect, definitely nothing more than a couple of scratches here and there. They were my original wheels that came on my old bike (~7k miles). The tires are Q3’s and have seen two track days (slow intermediate) and maybe 1500 miles at most on the street. I can get depth gauge info if you really want. Cush drive has been taken apart and cleaned and greased. Like pictured - front rotors and sprocket not included, rear rotor is included - but it will come with hardware for everything. I will not split these without buyers for each at the same time.
05-06 / 07-08 / 09-12 / 13-17
$500
 
#4 · (Edited)
First to post in this thread gets first chance to buy. Let's keep it simple. Post HERE.

Of course, bring anything to my attention if you have any questions or concerns.

I will be happy to take payment via a (non-gift) paypal exchange.

I will ship any item you want however you want, but that is on you.

I'll be happy to email or text you any specifics in pictures or answers you want.
 
#14 ·
Interested in the mirrors.

Can you measure the distance of the holes on the mount (center to center in centimeters) and I will check if it will work with my 2006?

These all look the same to me so I think it will fit (hoping the mounting plate is close to same size overall as 2006). I vaguely recall someone saying they did this on the forum at one point, but can't find anything on it.

Thanks.
 
#25 ·
They are! I've had a couple of PM's about them but nobody has made a payment.


Hello, I would like to buy your rearsets and shorty levers if still available.
Thankyou
Jon
I saw your PM and replied, sorry I didn't see this post.



I'll buy the Radiator Guard if you still have it.
Sold :D
I'll make sure it's cleaned up and get it shipped out tomorrow.
 
You have insufficient privileges to reply here.
Top