2006 ZX6R TB Exhaust Single Can Setup? - ZX6R Forum
 2Likes
  • 1 Post By riverszzr
  • 1 Post By Drkreign
 
LinkBack Thread Tools Display Modes
post #1 of 8 Old 05-16-2017, 10:04 AM Thread Starter
Squid
 
Join Date: May 2017
Posts: 5
2006 ZX6R TB Exhaust Single Can Setup?

Hey everyone! Recently bought an 06 636 that was wrecked and needed some minor things that I'm currently waiting to arrive. While I waited I wanted to "fix" my exhaust. The PO took the TB slip on muffler and short 90 degree pipe that connects to the midpipe...deleted the midpipe and hooked the pipe directly onto the header. Obviously doesn't look good and is WAY to close to the ground.

I've found a bike that is running the same can as I am but I'm not sure what midpipe he used. Here's a photo of the bike:


Can anyone tell me what pipe to use? Even TB's couldn't help me on this as they didn't make a single can version. Any help would be greatly appreciated!!
Drkreign is offline  
Sponsored Links
Advertisement
 
post #2 of 8 Old 05-17-2017, 08:41 AM Thread Starter
Squid
 
Join Date: May 2017
Posts: 5
Anyone?
Drkreign is offline  
post #3 of 8 Old 05-18-2017, 08:11 AM Thread Starter
Squid
 
Join Date: May 2017
Posts: 5
Quote:
Originally Posted by Drkreign View Post
Anyone?
Really helpful place we have here I see lol
Drkreign is offline  
Sponsored Links
Advertisement
 
post #4 of 8 Old 05-18-2017, 09:06 AM
MotoGP Champion
 
riverszzr's Avatar
 
Join Date: Sep 2008
Location: 4 months of frozen hell
Posts: 4,720

I Ride: 86,000+ mile '07 ZZR600
Just because you didn't get the answer you wanted doesn't equate to the place being unhelpful...

Would you rather get zero answers because people truly can't help......or I suppose you would rather have 40 answers from dumbfucks spouting stupid shit and guessing?
sbk1198 likes this.

Stupid people say stupid things on the internet, so be wary of who those people are. If you solicit advice on the internet, just keep in mind 99% of what you'll receive is not based on fact or science-and likely atleast 95% of it is based on bullshit and bravado regurgitated from some other schlub who also did not experience any of what they claim and are also full of shit. If you don't like my bluntness- too bad. I am not here to please you, so move along, your approval is not desired nor is it needed. So before opening your pie hole and adding more stupidity, perhaps sit back, listen, absorb and learn something. You know that saying, it is better to remain silent and thought a fool than to open your mouth and remove all doubt!
riverszzr is offline  
post #5 of 8 Old 05-18-2017, 09:50 AM Thread Starter
Squid
 
Join Date: May 2017
Posts: 5
Quote:
Originally Posted by riverszzr View Post
Just because you didn't get the answer you wanted doesn't equate to the place being unhelpful...

Would you rather get zero answers because people truly can't help......or I suppose you would rather have 40 answers from dumbfucks spouting stupid shit and guessing?
Given the bike posted is a bike from here (notably from a member no longer on the forum) it does stand to reason that someone knows the setup.

For your dumbfucks posting stupid responses comment, I'm not sure at this point even a guess wouldn't be a bad thing given it appears this is a rare/one-off setup and a guess to who might know about it could lead somewhere. I may not know who on this forum to go to or what manufacturers might know what this setup is but someone could potentially point me to the right place even off a guess...Glass half empty vs glass half full I suppose
Drkreign is offline  
post #6 of 8 Old 05-18-2017, 01:59 PM
Squid
 
deejumpz9m's Avatar
 
Join Date: Apr 2016
Location: Vancouver
Posts: 29

I Ride: 2007-08 ZX6R
Garage
Iíll make the assumption that the TB can is from a CBR model. Itís compatible considering it will have the same in/out diameter (51mm?). Also, it may have a custom link pipe that connects to the midpipe.
deejumpz9m is offline  
post #7 of 8 Old 05-18-2017, 03:35 PM
MotoGP Champion
 
riverszzr's Avatar
 
Join Date: Sep 2008
Location: 4 months of frozen hell
Posts: 4,720

I Ride: 86,000+ mile '07 ZZR600
^ well there you go....... TB Can is likely from another bike, which bike is unknown- possibly a CBR600RR or even a CBR1000RR

Perhaps if you knew who the member is, or his screen name someone who knew him could chime in?

Did you simply ask him if he had the stock stuff laying around?

I would assume you could find a stock mid pipe for cheap and try that

Stupid people say stupid things on the internet, so be wary of who those people are. If you solicit advice on the internet, just keep in mind 99% of what you'll receive is not based on fact or science-and likely atleast 95% of it is based on bullshit and bravado regurgitated from some other schlub who also did not experience any of what they claim and are also full of shit. If you don't like my bluntness- too bad. I am not here to please you, so move along, your approval is not desired nor is it needed. So before opening your pie hole and adding more stupidity, perhaps sit back, listen, absorb and learn something. You know that saying, it is better to remain silent and thought a fool than to open your mouth and remove all doubt!
riverszzr is offline  
post #8 of 8 Old 05-19-2017, 04:41 AM Thread Starter
Squid
 
Join Date: May 2017
Posts: 5
Quote:
Originally Posted by deejumpz9m View Post
Iíll make the assumption that the TB can is from a CBR model. Itís compatible considering it will have the same in/out diameter (51mm?). Also, it may have a custom link pipe that connects to the midpipe.
Hmm, is this a mod that some others have used before?

Quote:
Originally Posted by riverszzr View Post
^ well there you go....... TB Can is likely from another bike, which bike is unknown- possibly a CBR600RR or even a CBR1000RR

Perhaps if you knew who the member is, or his screen name someone who knew him could chime in?

Did you simply ask him if he had the stock stuff laying around?

I would assume you could find a stock mid pipe for cheap and try that
Trust me, I grabbed everything he had lol. But he had already started stripping it to make it a street fighter and for some stupid reason decided to run the exhaust this way.

The UN of the member that had the exhaust for sale at some point is 05bluezx6r. I messaged him before making this post but once I seen he hasn't logged in for over two years I figured that was a moot move. Here's the link to where he mentioned that the setup was for sale: WTB 05-06 ZX6R Two Brothers Exhaust
riverszzr likes this.
Drkreign is offline  
Reply

  ZX6R Forum > ZX6R Forum > Mechanical and Technical

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Parts compatibility list ! Stiggy Mechanical and Technical 155 05-13-2017 07:09 AM
Re-install OEM Exhaust and cables zx6r 2006 jacub Mechanical and Technical 13 08-17-2013 01:43 AM
Zx6r 2006 stock exhaust and headers cha12les Classifieds 2 08-14-2012 08:51 PM
2006 ZX6R 636 shortened Stainless Yoshimura RS-5 Slip on Exhaust Orkin The ZX6R 1 10-22-2011 09:17 PM
How to: Install Danmoto Exhaust (and baffle) Chaos Guides 9 06-12-2011 04:43 PM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome